1.1 Technology of generation and frequency mixing for receivers telemetrically controlled aboard satellites
1.2 Technologies of digital amplification, filtering and broadband conversion of video signals
1.3 Tecnology for the design and manufacture of terminals UHF and SSB duplex for networks
1.4 Technology of design and modular manufacturing of transceivers and repeaters for half duplex netwoks, with connection and change of remote channel
1.5 Microprocessor design technology for automatic control of the tuning and frequency generation in mobile phones
1.6 Technology of acquisition, management and integration with A / D 12-16 bits conversion and radio-cable interfaces RS 485
1.7 Automation digital technology for integrated management of multimedia resources in radio and TV studios
1.8 Mobile mixing digital technology of audio signals with frequency extension
1.9 Technologies of digital amplification, filtering and mixing in broadband of video signals
1.10 Microwave technology for reception and conversion to lower frequencies, up to 860 MHz, with modulation and coaxial distribution
1.11 Digital Control Technology to re-issue UHF signals using frequency synthesis and amplification of broadband
1.12 Frequency Synthesis via PLL and digital control to be used in signal and video generators with VIT
1.13 Information technology for orientation adjustment of VSAT based on optimization of cross polarization rejection
1.14 Information Technology for the acquisition, processing and data logging units on board of satellites
1.15 Spatial diversity technology on polarization for Yagi antenna array UMTS repeaters, with improved fading

2.1 Technology of design and microelectronic validation for custom circuits with features of resistance to high levels of radiation
2.2 Technology of ASIC and PLD design, as well as manufacturing of custom electronic equipment
2.3 Technology of microelectronic design to control Trunking networks with automatic frequency allocation and optimization of call setup times
2.4 Microelectronics technology 0.35 microms mixed CMOS, designed to enhance the capabilityof integration into mobile terminals
2.5 Microelectronics technology for the design and use of self-powered digital chips by radiofrequency in access control cards
2.6 Microelectronics technology for the development and integration into an ASIC of the protocol to access to a network node by an ADSL terminal
2.7 Microelectronics technology for balancing and controling electro-hydraulic radiographic examination beds
2.8 Microelectronics Technology of FPGA to control functions of acquisition, analysis and interpretation of ultrasonic data captured, and monitoring of interfaces radiographic equipments as well
2.9 Microelectronics technology for thermal control and efficient voltage control in X-ray tubes
2.10 Microelectronics technology for the design and manufacturing of electrical underwriters from active-reactive power
2.11 Microelectronics technology for the thermal control of heat exchangers in the progressive microwave tube of radar avionics
2.12 Microelectronics technology for full functional control of industrial furnaces and heat treatment forging of metals and alloys
2.13 Microelectronics technology for full functional control of industrial furnaces of cast aluminum

3.1 Electronics technologies of interface, interconnection protocols and modulation modes among the various systems on board in satellites
3.2 Coding technology and image transmission protocols narrowband radio
3.3 Software technology for the development of nodes and protocols radio access CDMA in broadband
3.4 Software and electronic technology for the development of the nodes and CDMA protocols in radio access network for multimedia contents

4.1 Microelectronics technology for starting diesel engines with variable control of time and heating temperature
4.2 Microelectronics technology for electronic ignition and the feedback control of exhaust gas in internal combustion engines
4.3 Storage system technology and smart electric charge by the detection and correction of voltage and current imbalances in individual cells battery of lithium and iron phosphate up to 40kWh
4.4 System Technology for electric power production by a fuel cell polymer integrated in a control system proportional of hydrogen, oxygen compressor and cooling radiator of 12kw

5.1 Technology of design and integration and modular assembly hardware and software for industrial laptop with flameproof and MTBF> 40,000 hours compliances
5.2 Information Technology for calculation, design and modeling of finite element inductances
5.3 Technology of design and manufacturing for inductances with low parasitic capacity associated
5.4 Technology of design and manufacturing for inductances with distributed power architecture
5.5 Technology of design and manufacturing for inductances with multilayer printed coils for SMD
5.6 Technology of design and manufacturing of high selectivity coil (Q) and / or the core grain oriented
5.7 Algorithms and software modeling technology for the dimensioning of wireless networks
5.8 Technology of design and manufacturing in microstrip of combiners and directional couplers signal to be used in class A and AB amplifiers in UHF and microwave bands
5.9 Custom designed optics technology for spherical progressive lenses with different constant refractives rates materials
5.10 Optical diffractive technology for the conception and design of interferometric networks and monochromators to measure number and size of particles in lubrication fluids, cleaning or heat exchange
5.11 Technology of optical spectrometry analysis by designing measuring chambers of gas concentration in oxide form, using the atomic absorption resonance of coherent monochromatic infrared light
5.12 CAD and finite elements information technology to design polymeric lens casting with precision of diopter hundredths

6.1 Silkscreen metallization technology for low cost rectifier diodes
6.2 Passivation technology with silica glass for high voltage diodes
6.3 Ion implantation technology for controlled doping in ultrafast diodes
6.4 Manufacturing technology of based printed circuit SMI with aluminum substrate for automotive and lighting applications
6.5 Technology of design and manufacturing of high cooling capacity dissipating by photogravure on printed circuit itself
6.6 Design and manufacturing technology of potentiometers and level sensors by cermet deposition tracks on alumina substrate with temperature coefficient offset
6.7 Technology of design and manufacturing of double touch cursors in copper-silicon alloys with high elasticity and low noise
6.8 Metallization technology silkscreen on insulating substrates with variable resistors for measuring liquids
6.9 Manufacturing technology of custom hybrid circuits using thick film on alumina substrate

7.1 Automatic parameterization information technology in final test production of active components
7.2 Measurement technology of mechanical wear in hydraulic devices by asymmetry applying steps and lag in frequency response
7.3 Improved technology of leak detection in deposits by combining pressure and sensing volatile organic compound concentration by semiconductor sensor( high precision gauge in ppm)

8.1 Flexible and custom manufacturing technology for mounting industrial PCs
8.2 Integrated manufacturing CIM Technology of printed circuit with charging system and automatic layout review
8.3 Flexible manufacturing technology for relays and timers with customized specifications in Automotive and MTBF> 50,000 hours
8.4 Welding technology nickel-gold for high efficiency SMD circuits

9.1 Control technology for wireless communication networks with encryption and automatic frequency hopping.
9.2 Control technology for wireless communications networks with shared frequency (trunking).
9.3 Information Technology of external protection networks for interconnecting devices and integrated managing perimeter security sensors
9.4 RFID networks technology for the interconnection of control production applications and agricultural managing devices
9.5 Networking layers technology for hierarchical integrating mobile terminals voice-data in communication networks.
9.6 Networking technology, interfaces and integration of industrial wireless networks and systems
9.7 Networking technology and network management software, WDM and data multiplexing
9.8 Information technology and interconnection networks for real-time query and cardiovascular data reception and medical information through GSM/3G UMTS
9.9 Integration Technology, loss control and networking with switching equipment, transmission and access to the local loop by ADSL and optic fiber
9.10 Subsystems integration technology protection, measurement and control with SCADA software and electrical codes
9.11 Networks transmission technology using multimode optical fiber in second window and digital monitoring

10.1 Multi-paid telematics systems technology with V34 modem and ASIC’s microelectronics
10.2 Data concentration, expansion and transmission technology in low frequency for data line modems
10.3 Design and manufacturing technology of high-speed modems tolerant to fault until 2Gbits
10.4 Digital multiplexing technology for transmission of voice and data
10.5 Digital multiplexing and frequency extension technology through phone line
10.6 Technology of frame assembly and disassembly for routers and switching nodes

11.1 Design and control technology for solar power and connection of traffic devices (parking meters, SOS poles, etc..) to GSM loop
11.2 Encryption and satellite communications technology for fleet monitoring systems
11.3 Information Technology of traffic control and electronic integration with differential GPS systems.
11.4 Acquisition systems control technology of low-power physicochemical parameters and radio link.
11.5 Software-hardware integration technology of digital signal processing (DSP) with GSM and GPS to centralized traffic management

12.1 Access, scanning and transmission technology to ISDN.
12.2 Radio telemetry software technology with protocols and structure, aimed to maximize noise immunity controlling machines
12.3 Interface technology (HLR) for the registration and control of GSM mobile subscribers with AXE switching node
12.4 Electronics and software technology for developing nodes and protocols radio DECT in access loops
12.5 A/D conversion and digital control and transmission technology from the terminal to the node through the subscriber loop

13.1 Remote power and monitoring technology of telephone equipment.
13.2 Infrared remote control technology for electrically noisy environments
13.3 Teleprocessing technology for data acquisition and SCADA software management for water distribution systems, air conditioning or electrical network monitoring
13.4 Remote control technology for remote maneuvers of programmers-switches
13.5 Digital control technology for automatic remote switching in radio frequency power load
13.6 Countermeasures or inhibition technology in microwave for disruption of guidance or mobile and unmanned vehicles communications, using high directivity antennas with adequate power, frequency spread spectrum and FSK modulation

14.1 Digital switched telephone technology with digital switchboards.
14.2 Switching software technology for developing channel signaling protocols
14.3 Switching technology and adaptive and improvements software in intelligent network
14.4 Signaling channels digital technology and selective calling with encryption

15.1 Electronic and control technology for the optimization of energy conversion at the level of equipment, systems and networks
15.2 Variable speed technology in AC motors by varying pulse width and voltage/frequency control by inverter IGBT
15.3 Technology of variable speed in AC motors using flux vector control and constant torque with output parameters encoders and feedback loop. IGBT inverter and induction machine dual stream
15.4 Technology of reversible permanent magnet machines and IGBT inverter of input/output voltage control dynamically variable, using software for hybrid electric vehicles
15.5 DSP digital control technology for inverters and UPS
15.6 Variable speed technology in DC motors using GTO and MOSFET

16.1 Information technology for the design of encryption algorithms types RSA and DAS
16.2 Software technology for developing cryptographic algorithms mode RSA for telephone terminal

17.1 Technology of capture, processing and digital image compression
17.2 Software technology for the capture, logging and image recognition
17.3 Technology of design and manufacturing of cheap intensive monitoring equipment for clinics
17.4 Technology of design and manufacturing of medium cost ultrasonic scanners for outpatient gynecology and cardiology
17.5 Software T echnology interpreting X-ray
17.6 Control information technology for the acquisition and distribution of information on naval tactical simulators
17.7 Technology of interpolation and digital signal processing in oscilloscopes
17.8 Digital technology to capture and processing images to be used in automatic detection of traffic incidents
17.9 Control Technology of width pulse modulation to create images and messages via LED diodes of high-intensity monochromatic and energy efficiency. Outdoor applications by fiber optic panel

18.1 Technology of design and manufacturing of transcutaneous ultrasound sensors.
18.2 Infrared sensors technology for the designing of an intelligent computer mouse manageable by disabled people through head movements
18.3 Electronic technology of thermoelectric sensors for instantaneous measuring of electrical power consumed
18.4 Piezoelectric technology of ultrasonic transmitting and receiving with high dynamic pulsed or continuous range for the detection of cracks in materials
18.5 Ultrasonic technology of radiant power emission for the treatment of foams in the food industry
18.6 Electronic technology for digital control of dynamic toll automatic accesses using infrared bidirectional communication

19.1 Mathematician-computer technology for the creation and customization of understanding algorithms to gesture recognition
19.2 Software technology for highway traffic management using algorithms, adaptative control, network interface and sensors
19.3 Software technology for integrated management of traffic lights with adaptative control
19.4 Technology of algorithms development, data acquisition and traffic management.

20.1 Digital technology of data acquisition from mechanical sensors and strain gauges
20.2 Digital technology microcontrolled in neuronal logic for adaptive control of test equipment
20.3 Data acquisition technology, local or remote, from up to 16 channels multiplexed ultrasonic
20.4 Multilevel trigger technology by filter, masks and word searching for data acquisition, up to 100 MHz in logic analyzers
20.5 Information technology for automatic measurement of “Bit error rate” in the trans-modulation of QPSK TV satellite signals to QAM cable TV
20.6 Control technology for acquisition and A/D data conversion for weather and environmental management or urban traffic
20.7 Technology of acquisition and data storage for parameter control in hydroelectric facilities and watersheds.
20.8 Impedance matching technology for data transmission throughout power line.
20.9 DSP microprocessors design technology for control and integrated protection of electric power substations
20.10 Acquisition, control and data transmission and remote measurements technology in network subsystems and electrical conversion
20.11 Analog technology of design and manufacturing of medium-high resolution timers programmers
20.12 Digital technology programming, sensing and charging with power reserve up to 12 years
20.13 Multifunction digital timing technology with channels programming and battery or network voltages availability

21.1 Materials technology by plasma deposition or “magnetron sputering” to be applyed in combination of BN and CB over lenses to give them resistance to scratching
21.2 Materials technology based on the introduction during the casting or subsequent vacuum to lenses coating with phthalocyanine or benzotriazal, intended to achieve variable chromaticity or selective absorption of ultraviolet radiation
21.3 Materials technology for obtaining spatial distribution with variable refractive index depending on progressive models, which improve size-enhancing and aberration in the lenses